AutoAqua Smart AWC DUO

Automatic water change system and replenishment of evaporated water. Set the frequency of water changes (full freedom, e.g. every day, every two or four days up to 99 days or every 1 hour, 2 hours, etc.) and AWC Duo will pour water to the level of one of the optical sensors, and then add water from the reserve to the level of the second upper sensor optical. Additionally, in the event of water evaporation, the system will add water from the RO water tank to the level of the upper sensor. By purchasing this system, you do not have to worry about changing water or adding evaporated water.

Set the frequency of automatic water changes. Minimum 1 hour - maximum 99 days. (we recommend changing the water every day or twice a day)

- installation of optical sensors = amount of water changed
The set includes two optical sensors. Place them at different heights - this way you will determine the amount of water changed. (let's assume that your sump has dimensions of 50x30x40. If the difference between the sensors is 10cm, the system will change 15l of water. 50x30x10cm = 15l

From now on, the set will automatically pour water to the level of the lower sensor. It will finish pouring and then add water from the reserve tank to the level of the upper sensor.
Each time the water evaporates, the system will automatically top up the water level to the upper sensor with RO water

LCD display:
It will make programming easier for you. Additionally, it displays a whole range of information about the pump's operation, etc. The most important thing, however, is the constant countdown to the next water change.

Optical sensor and installation method:
This is a much better solution than a regular float! But it is not everything. The sensor from the AutoAqua set has a double "eye", thanks to which it has double control over the situation.
The sensor is installed quickly and easily, using a strong magnet. Therefore, you can install the eye anywhere. Maximum glass thickness 12.7mm

QST (Quick Security Technology) security program:
Intelligent top-up will not allow the tank to be overflowed, even in the event of a system failure. Why? If the first filling of the Ro tank or water change, including separate pouring and pouring, lasted e.g. 10 seconds, no subsequent filling may exceed 60 seconds. That is, it allows a maximum of 6 times more than the first time. In this way, we exclude the possibility of overflowing the aquarium in the event of a sensor failure or contamination, computer error is excluded, and it protects the pump against running dry if the reserve is empty.
Other security features:
Using beeps and a combination of colored LED lights, the computer will alert you to any possible problems. For example: incorrectly connected pump, incorrect and contradictory eye readings - possible contamination of the eye, no filling for 72 hours and other cases depending and not dependent on Smart AWC DUO.

Additionally, the set includes 3 x air inlet installed on the pipe. It allows you to get rid of water from the tube when the pump is not working.

What's included?
- control computer with LCD display
- 2 x "eye" sensor on the cable with the computer
- charger
- 3 x water pump
- original packaging
- 3 x hose holder
- 600cm hose
- 3 x air inlet connector

Power of each pump:
- capacity: 280l/h
- lifting pole: 250cm
- power consumption: 4.8W

Power cord length: 180cm
Length of the cable between the computer and the pump: 180cm